A Titanium heat exchanger is an excellent piece of equipment with high heat exchange efficiency, simple structure, and durability, and can prevent damage to the heat exchange tube formed by the impact of fluid. Its structural performance is described as follows: 1. A buffer plate and a diversion hole are arranged under the dual-purpose liquid […]
Industrial pure titanium is divided into four grades according to the number of impurity elements it contains, namely TA1, TA2, TA3, and TA4. They basically correspond to grades 1 to 4 of titanium in the United States, namely Gr.1, Gr.2, Gr.3, and Gr.4 titanium plate. As the purity decreases, the strength and hardness of industrial […]
TC4 titanium alloy is an α-β type titanium alloy successfully developed by the United States in 1954, containing 6% α stable element and 4% β stable element V. The nominal composition of it is 7.0 aluminum equivalent, molybdenum equivalent 2.9, and contains 10%-15% beta phase in the annealed state. Al improves the room temperature strength […]
The macrostructure of copper alloy ingot can be divided into three regions: chilled region, columnar crystal region, and equiaxed crystal region. The chilled zone is a layer of the shell that is close to the mold wall of the ingot, and its thickness is relative to several grains. The equiaxed crystal region is located in […]
When we purchase stainless steel pipes, we will find out why the price difference between thin and thick stainless steel pipes of the same material can be one or two thousand? What is the reason? This is because, in addition to material, precision, surface, and wall thickness is also a factor that affects the price. […]
Eutectic solder can weld titanium alloys. The melting point of eutectic solder is 183 degrees. When the content of tin is higher than 63%, the melting temperature increases and the strength decreases. When the content of tin is less than 10%, the welding strength is poor, the joint becomes brittle, and the lubricating ability of […]
Silicon carbide has two commonly used basic varieties, black silicon carbide and green silicon carbide, both of which belong to α-SiC. ①Black silicon carbide contains about 95% SiC, and its toughness is higher than that of green silicon carbide. It is mostly used for processing materials with low tensile strength, such as glass, ceramics, stone, […]
The research results show that titanium is a beneficial trace element, which can not only enhance the photosynthesis of plants, increase the chlorophyll content of leaves and the activity of catalase in plants, but also promote the absorption and operation of nitrogen, phosphorus and potassium by plants, thereby Play a role in increasing crop yield […]
Speaking of “titanium rod”, many people must not know or understand it, let alone where it is used. In fact, many of the instruments we see in our lives use mostly titanium materials. Tell the titanium powders about the cleaning method of the titanium rod filter. After the titanium rod filter element is used for […]
1. With the current popularity of nickel crystals in nickel pipe fittings, unscrupulous merchants will use hair crystals or rough hair crystals to pretend to be nickel crystals. Many people have been confused about the difference between nickel crystals and hair crystals. In fact, the simple way to distinguish is hair crystals. Whether it is […]
Room 2-1104, Jinqiao Int’l, Sanqiao, Fengdong New Town, Xixian New Area, Shaanxi FTZ, China
Tel: +86-29-89506568
Email: [email protected]