Through 30 days hard work, finally, we successfully delivered 2 pieces ∅239.6x8x4000mm welded Hastelloy C22 Tubes. Standard: ASTM B626/B619， Grade: UNS N06022/C22. They will be shipped by sea to our French customer. Hereby I am sharing some photos with you: Tube Wall Thickness Measurement: Tube OD Measurement: PMI TEST: Tube surface: If you have RFQs […]
Ti-6Al-4V-ELI, UNS R56407, Grade 23 (ELI=Extra Low Interstitials) INTRODUCTION Ti-6Al-4V-ELI, Grade 23 alloy (Extra Low Interstitials, UNS R56407) is a higher purity grade of Ti-6Al-4V alloy. This grade has lower oxygen, carbon, and iron content. It is used in biomedical applications such as surgical instruments, orthopedic implants, and is the preferred grade for marine and […]
The coronavirus and its mutated virus are still spreading all over the world, the global situation is getting worse…We all are facing multiple pressures and risks… But during this very hard time, our one of our happy Russian customer has placed us 1,750Kgs Alloy 718/UNS N07718/Inconel 718 round bar order. Through our hard work and […]
Through a couple of weeks of effort, we are ready to deliver the ASTM B111 UNS C61300 Aluminum Bronze Tubes to our Italian Customer. They will be used for heat exchangers, the dimension is: OD 10MM x WT 0.89MM x Length 1,500MM. We also can produce UNS C11000, UNS C44300, UNS C68700, UNS C70600, UNS […]
Finally, we successfully delivered the precious metal sheet to our Saudi Arabia customer. They will be used for manufacturing the Pressure Vessels for the Petrochemical plant. Standard: ASME SB265, ASME SECTION II Part B Grade: 2 Dimensions: 3x1000x1000mm 10x2000x2500mm 12x1600x3000mm 20x1000x1200mm
Ammonia is an important raw material for the manufacture of nitric acid, ammonium salt and amine. Ammonia is gas at room temperature and can be liquefied under pressure. Most metals such as stainless steel, aluminum, magnesium, titanium, etc. have excellent corrosion resistance to ammonia gas, liquid ammonia and ammonia water, except copper and other copper […]
The heat treatment of Cu-Be alloy is mainly solid solution annealing and aging hardening. Unlike other copper alloys whose strength is obtained only by cold machining, wrought copper beryllium is obtained by cold machining and hot aging hardening processes up to 1250-1500 Mpa. Aging hardening is often referred to as precipitation hardening or heat treatment. […]
As we all know, copper and steel (iron) are two different metals. The thermal conductivity of copper is 7-11 times greater than that of ordinary carbon steel, and it is difficult to reach the melting temperature. When copper is melted, its surface tension is 1/3 less than that of iron, and its fluidity is 1-1.5 […]
The common heat treatment methods of copper alloy are homogeneous annealing, stress – free annealing, recrystallization annealing, solid solution and aging treatment. In order to prevent oxidation during processing, save the cost of pickling and obtain a bright surface, it is allowed to anneal copper alloy strip, wire and coil tube in a protective atmosphere […]
In last article, we discussed the question”What’s Beryllium Copper”, as well as we know, Beryllium Copper is also known as beryllium bronze, is a type of precipitated hardened copper alloy with beryllium as the main alloying element. Its density is 8.3g/cm³, 0.2~2.75% beryllium making its strength is twice that of other copper alloys. Beryllium copper […]
Room 2-1104, Jinqiao Int’l, Sanqiao, Fengdong New Town, Xixian New Area, Shaanxi FTZ, China
Tel: +86-29-89506568
Email: [email protected]